Standard
Use with automatic staplers or nailers on wood floors. Use with aluminum drives or fluted 9 gauge nails or with adhesives on concrete or hard to nail floors. Also available pre-cut into 6 inch lengths for easier installation. |
 |
|
Regular Wood
3/4 inch x 14.5 gauge ring shank anchoring nail. Use on wood floors or subfloors made of wood products such as plywood or OSB (oriented strand board). |
 |
|
Heavy Duty Wood
One inch x 13 gauge ring shank anchoring nail. Use on wood or wood product subfloors where extra strength is needed. Provides extra length to drive through 1/4 inch underlayment and anchor into the structural floor below. |
 |
|
Regular Concrete
11/16 inch x 12 gauge hardened shank anchoring nail. Use on most concrete floors. |
 |
|
Heavy Duty Concrete
5/8 inch x 10 gauge hardened shank anchoring nail. Use on hard concrete floors. Minimizes nail bending or shattering and concrete break-out around the nail. |
 |
|
Dual-Purpose
11/16 inch x 12 gauge hardened anchoring nail with added rings on the shank. Use on both wood and concrete floors. |
 |
|
Elasticel
1-1/4 inch x 12 gauge spiral shank anchoring nail. Use on lightweight elasticel or acoustical concrete floors that have been designed to absorb sound between the floors of a building. |
 |
